BrewGas L30 (Hambleton Bard S30) - CO2 Gas Cylinder - New - Call For Availability
Add this item to your cart and then use our handy Shipping Calculator on the basket page to calculate your delivery charge.
Delivery to UK addresses starts at just £1.50 and orders over £70 are eligible for free UK delivery*
Please call us on 01225 448080 to check availability.
The Brewgas L30 (formerly filled by Hambleton Bard and called an S30) CO2 gas cylinder is for adding carbon dioxide to your beer barrels and kegs fitted with a S30 gas injection valve. These cylinders contain an average of 240grams food grade carbon dioxide E290.
This is for a new full cylinder of CO2. These are refillable and refills are available for purchase on return of empty one.
To use this cylinder to add gas to your beer barrel you simply screw onto the S30 valve (see above) and screw down until you hear a one second squirt of gas, then release.
NB. This cylinder will only work with genuine S30 valves. If your valve has a pin sticking up in the centre, or if it is not a S30 valve then this cylinder MUST NOT BE USED.
Choose this product if this is your first cartridge. If you are wanting to exchange an old one for a refill, then please see CO2 Gass Cylinder - Refill product.
There may be the odd occasion, that on removing the cylinder that the gas does not stop. This is due to the cold gas making the metal shrink. If this happens, simply pull off a cup of hot tap water (not boiling), and submerge the valve in the hot water for 30 seconds. If the gas is still escaping, give a quick shot of gas into your barrel and this should allow the valve to re-sit itself in the right place. If it is still leaking gas, complete the above steps again.